Compleo A01AE11001.11, Operating Instructions Manual

Page: 70 / 114

70 A01Axxxxxx.xx | 04 2022-11
10 The charging system indicates the "Type 2 – Charged: + Charging
duration
+ Charge" state.
• The charging process at the corresponding charger interface
is in progress. The charged capacity is displayed. The
charging duration is displayed.
11
The charging system indicates the "Type 2 – Charged: + Charging
duration
+ Finished" state.
• The charging process has finished at the corresponding
charger interface. The charged capacity is displayed. The
charging duration is displayed.
12 The charging system indicates the "Type 2 – Charging process
completed" state.
• The charging process has been correctly completed at the
corresponding charger interface.
13 The charging system indicates the "Type 2 – Charged: + Charging
duration
+ Have a good trip" state.
• The charging process at the corresponding charger interface
is in progress. The charged capacity is displayed. The
charging duration is displayed. Have a good trip.
14 The charging system indicates the "Disconnect plug from vehicle to
end" state.
• The charging process can be stopped at the corresponding
charger interface. The plug must be disconnected from the
vehicle.
15
The charging system indicates the "Type 2 + Starting a new charging
process not possible!" state.
• The charger interface is not ready for operation. A charging
process cannot be started.
16 The charging system indicates the "Authorisation unsuccessful"
state.
• The authorisation process has not been successfully
completed. The charging process cannot be performed.
17 The charging system indicates the "Authorisation not possible with
this card" state.
• The authorisation process has not been successfully
completed. The charging process cannot be performed with
the corresponding RFID card or chip.