Compleo A01AE11001.11, Operating Instructions Manual

Page: 33 / 114

2022-11 A01Axxxxxx.xx | 04 33
4. Erect the pillar and place it on the selected
location. While doing so, carefully pull the
supply lines further out of the upper
opening to avoid looping.
5. Align the pillar at the selected position.
Check that no supply lines are crushed!
6. Mark the hole pattern of the pillar base on
the ground.
7. Move the pillar to the side so that the
markings on the ground are accessible.
Check that the supply lines are not twisted
or strained.
8. Drill holes on the markings using a suitable
drilling tool.
– Drill hole diameter: according to the
manufacturer's specification of the
ground anchor
– Drill hole depth: according to the
manufacturer's specification of the
ground anchor
9. Insert ground anchor according to
manufacturer's instructions. Allow injection
mortar to harden if used.
Fig. 11: Boreholes