Compaq TruCluster Server AA-RHGWB-TE, Manual

Page: 291 / 320

Table 10–3: Installing a KZPSA-BB or KZPBA-CB for use with External
Termination (cont.)
Step
Action Refer to:
TL890 with TL891/TL892 Section 8.7
TL894 Section 8.8
TL895 Section 8.9
TL893/TL896 Section 8.10
TL881/TL891 DLT MiniLibraries Section 8.11
Compaq ESL9326D Enterprise Library Section 8.12
_____________________ Notes _____________________
If you install tape devices on the shared SCSI buses, ensure that you
understand how the particular tape device(s) affect the shared SCSI bus.
The TL893, TL894, TL895, TL896, and ESL9326D have long internal
SCSI cables; therefore, they cannot be externally terminated with a
trilink/terminator combination.
These tape libraries must be on the end of the shared SCSI bus.
We recommend that tape devices be placed on a separate shared SCSI
bus.
10.1.3 Displaying KZPSA-BB and KZPBA-CB Adapters with the show
Console Commands
Use the
show config
and
show device
console commands to display
system configuration. Use the output to determine which devices are
KZPSA-BBs or KZPBA-CBs, and to determine their SCSI bus IDs.
Example 10–1 shows the output from the
show config
console command
on an AlphaServer 4100 system.
Example 10–1: Displaying Configuration on an AlphaServer 4100
P00>>> show config
Compaq Computer Corporation
AlphaServer 4x00
Console V5.1-3 OpenVMS PALcode V1.19-14, Tru64 UNIX PALcode V1.21-22
Module Type Rev Name
System Motherboard 0 0000 mthrbrd0
Memory 64 MB SYNC 0 0000 mem0
Memory 64 MB SYNC 0 0000 mem1
Memory 64 MB SYNC 0 0000 mem2
Memory 64 MB SYNC 0 0000 mem3
Configuring Systems for External Termination or Radial Connections
to Non-UltraSCSI Devices 10–9