Compaq TruCluster Server AA-RHGWB-TE, Manual

Page: 162 / 320

# hwmgr -get attribute -a name -a dev_base_name
| more
Use the
more
search utility (/) to search for the worldwide
name of the storageset you have set up for the particular
disk in question. The following example shows the format of
the command output:
# hwmgr -get attribute -a name -a dev_base_name
1:
name = Compaq AlphaServer ES40
2:
name = CPU0
.
.
.
62:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002e
dev_base_name = dsk15
63:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-0030
dev_base_name = dsk16
64:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002f
dev_base_name = dsk17
65:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-0028
dev_base_name = dsk18
66:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002b
dev_base_name = dsk19
67:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-002a
dev_base_name = dsk20
68:
name = SCSI-WWID:01000010:6000-1fe1-0000-0d60-0009-8080-0434-0029
dev_base_name = dsk21
69:
name = SCSI-WWID:0710002c:"COMPAQ CDR-8435 :d05b003t00000l00000"
dev_base_name = cdrom0
.
.
.
For more information on the hardware manager (
hwmgr
),
see
hwmgr
(8)
.
2. Search the display for the UDIDs (or worldwide names) for each of the
cluster installation disks and record the
/dev/disk/dsk n
values.
If you used the
grep
utility to search for a specific UDID, for example
hwmgr -view dev | grep "IDENTIFIER=131"
repeat the command
to determine the
/dev/disk/dsk n
for each of the remaining cluster
disks. Record the information for use when you install the cluster
software.
6–52 Using Fibre Channel Storage