Diagnostics and Troubleshooting
6-11
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: g-ch6 Diagnostics and Troubleshooting Last Saved On: 3/3/99 11:54 AM
Table 6-2
Fault Symptom Codes
continued
FSC
Message
Description
205x
No Free Queues
The system could not allocate a free
queue.
206x
Calib. Error Port x
When trying to locate the unit attached
to port x, the pass-thru elevator
reached the top of rail.
206f
Pass-thru Init Error
The pass-thru elevator did not travel a
minimum distance to reach the top of
its travel.
2070
Command Timeout
Enter to reboot. The ten minute timer
was exceeded when trying to fetch
from a drive.
2071
Command Timeout
Internal error only. Not reported to the
operator or host.
2072
Command Timeout
Power Down, Wait 30 seconds, Power
Up. Occurs if the power is cycled too
quickly and the DLT drive comes up in
an error state and doesn’t
communicate with the library
controller.
2073
Drive Config Error
Set if the Alternate Unload has not
been selected. This currently applies
only to DLT7000’s with a controller
microcode revision greater than 50.
2074
Stow Error
A stow timeout error has occurred
when accessing a remote unit. Press
Enter to Reboot for orphan cartridge
recovery.
2075
Fetch Error
During a remote fetch operation, the
remote unit returned an error.
3001
Picker Retries Exceeded
Remove from code.
continued
