Configuration
4-5
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibary System User's Guider Comments:
Part Number: ER-TL891-UA.A01 File Name: e-ch4 Configuration Last Saved On: 3/1/99 2:15 PM
Set Sequential Configuration
NOTE:
Sequential Split mode requires two drives. The default is Random.
To operate the TL891 in Sequential Mode, the following configuration
parameters must be established:
■
Library Mode- change from Random (default) to Sequential DLT0
■
Sequential Mode must remain at Normal (default)
■
Test Unit Ready (TUR) - must remain at Custom (default)
To establish these parameters for Sequential Mode operation, proceed as
follows:
1.
From the Default Menu press
Enter.
The Main Menu shown in Figure 4-
6 appears:
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
Figure 4-6. Main Menu
