6-8
TL891 MiniLibrary System User's Guide
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: g-ch6 Diagnostics and Troubleshooting Last Saved On: 3/3/99 11:54 AM
Table 6-2
Fault Symptom Codes
continued
FSC
Message
Description
1025
Overlapped Ctl Cmds
The control process sent a command
while one was in process.
1026
Overlapped Ctl Msgs
The control process sent a message
while one was in process.
1027
Control Process .
The SCSI control process is busy
1028
Control Initializing
The SCSI control process is initializing.
1030
Invalid SCSI ID
The SCSI in NOVRAM is set to >= 8 an
the PWB is not configured for Wide
SCSI. Would only occur during SCSI
initialization.
2001
Ctl Invalid Command
Ctl. Invalid Command
2002
Undefined Config
An unsupported configuration was
detected.
2003
Invalid Drive State
One of the DLT drives was in an invalid
state This is caused by either
attempting to fetch a cartridge from an
empty drive, or stowing to a drive that
already has a cartridge loaded.
2004
Loader Not Ready
Currently not displayed.
2005
SCSI Id Not Set
An attempt to set the DLT SCSI id
failed.
2006
DLT Comm Open Error
An attempt to open a COM port failed.
2007
Door Fault
An error occurred while attempting to
move the door.
continued
