3-44
TL891 MiniLibrary System User's Guide
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: d-ch3 Installation Last Saved On: 3/2/99 2:30 PM
Set Reserved Slots: Some host software imposes size limits on tape library
magazines for licensing purposes, and will not operate with a library that
exceeds the licensed size. This configuration option enables you to withdraw
some of the slots in the Expansion Unit from use as storage slots in order to
meet licensing requirements.
Set Special Configuration: This option contains predefined Compaq
operational configurations. Refer to Table 3-3, Special Configuration Options,
for default configuration characteristics.
Set Default: This option resets all of the preceding configuration options to
their factory defaults. It does not affect the settings of the SCSI IDs of the
DLT drives.
The following tables, Table 3-2, MiniLibrary Configuration Options, and
Table 3-3, MiniLibrary Special Configuration Options summarize the
configuration settings for the Mini-Library Base Module.
NOTE:
The options described in Table 3-2 and Table 3 -3 represent the version of the
firmware in use when this manual was written. If the displays on your control panel differ
from those described here, you may find an up to date listing of configuration options on
the Compaq Website listed in the front of this manual.
Reference Table 3-2:
* Designates Default Settings
(1) Applies to Base Module Display
(2) Applies to Expansion Unit Display
Reference Table 3-3:
The default settings are shown in the third column, and other possible settings are
shown in the second column.
