Diagnostics and Troubleshooting
6-5
Compaq Confidential – Need to Know Required
Writer: Everett Godaire Project: TL891 MiniLibrary System User's Guide Comments:
Part Number: ER-TL891-UA.A01 File Name: g-ch6 Diagnostics and Troubleshooting Last Saved On: 3/3/99 11:54 AM
Fault Symptom Codes (FSC)
Fault Symptom Codes appear in the Fault Screen described in Chapter 2. Each
FSC is accompanied by a descriptive message and instructions for clearing the
fault. When a fault persists, the operator should look up the FSC in Table 6-2
to determine the error recovery procedure to be followed. If you call Compaq
Technical Support about a fault condition, be sure to furnish the FSC to aid in
identifying the problem.
Table 6-2
Fault Symptom Codes
FSC
Message
Description
0101
Unused Interrupt
An undefined interrupt occurred.
0102
Enqueue'g a Null Ptr
A NULL pointer was passed to one of
the enqueing functions. This is
generally a firmware bug.
0103
Invalid Cmd Rec'd
An illegal trace command was
received by the trace process.
0201
Trc Comm Open Error
The trace port could not be opened.
0301
Novram Init Error
A failure occurred when trying to
initialize the Novram.
0302
Novram Chksum Error
A checksum error was detected while
reading the Novram.
0303
Novram Program Error
A problem was detected while trying
to update the Novram.
0304
Novram Downld Error
An error was detected while trying to
download configuration data.
0305
Novram Data Error
An error was detected while trying to
validate the Novram.
0306
Novram Update Error
A problem was detected while trying
to update the Novram.
continued
