Removal and Replacement Procedures
2-20
NAS B2000 Maintenance and Service Guide
COMPAQ CONFIDENTIAL
Codename: Collins Part Number: 292280-001 Last Saved On: 5/30/02 11:58 AM
4.
Press the PCI slot release lever to unlock it.
5.
Open the PCI slot release lever.
6.
Slide the expansion slot cover out of the slot.
2
1
3
Figure 2-17: Removing the expansion slot cover from
slot 3
CAUTION:
Always install either an expansion board or an expansion slot
cover. Operating the device without an expansion board or slot cover results in
improper airflow and cooling that can lead to thermal damage.
Reverse steps 1 through 6 to replace the expansion slot cover.
Expansion Board (Slots 2 and 3)
To remove an expansion board from slots 2 and 3:
1.
Extend or remove the device from the rack. See the “Preparation Procedures” section in
this chapter.
2.
Remove the access panel. See the “Access Panel” section in this chapter.
3.
Open the PCI riser cage door.
