Removal and Replacement Procedures
NAS B2000 Maintenance and Service Guide
2-13
COMPAQ CONFIDENTIAL
Codename: Collins Part Number: 292280-001 Last Saved On: 5/30/02 11:58 AM
To replace a power supply:
1.
Remove the protective cover over the connector pins on the new power supply.
2.
Slide the power supply into the bay until it locks into place.
3.
Connect the power cord.
4.
Swing the cable management arm into place and lock it.
5.
Route the power cord in the cable arm.
Access Panel
CAUTION:
Do not operate the device for extended periods without the access
panel. Operating the device without the access panel results in improper airflow
and improper cooling that can lead to thermal damage.
To remove the access panel:
1.
Extend or remove the device from the rack. See the “Preparation Procedures” section in
this chapter.
2.
Flip up the hood latch handle.
3.
Turn the handle one-half turn counter-clockwise. When the latch disengages, it extends
upward.
1
2
Figure 2-9: Unlocking the hood latch
