2-2
Compaq ProLiant DL380 Generation 2 Server Maintenance and Service Guide
Symbols on Equipment
25 kg
55 lb
Any product or assembly marked with these symbols indicates that the component
exceeds the recommended weight for one individual to handle safely.
WARNING:
To reduce the risk of personal injury or damage to the equipment,
observe local occupational health and safety requirements and guidelines for manual
material handling.
Any surface or area of the equipment marked with these symbols indicates the
presence of a hot surface or a hot component.
WARNING:
To reduce the risk of injury from a hot component, allow the surface to
cool before touching it.
Any surface or area of the equipment marked with these symbols indicates the
presence of electrical shock hazards. The enclosed area contains no operator
serviceable parts.
WARNING:
To reduce the risk of injury from electrical shock hazards, do not open
this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a network interface
connection.
WARNING:
To reduce the risk of electrical shock, fire, or damage to the equipment,
do not plug telephone or telecommunications connectors into this receptacle.
CLASS 1 LASER PRODUCT
This label or equivalent is located on the surface of your CD-ROM drive. This
label indicates that the product is classified as a Class 1 Laser Product.
Rack Warnings and Cautions
WARNING:
To reduce the risk of personal injury or damage to the equipment, adequately
stabilize the rack before extending a component outside the rack. Extend only one component
at a time. A rack may become unstable if more than one component is extended.
WARNING:
To reduce the risk of personal injury or damage to the equipment:
■
Extend the leveling jacks to the floor.
■
Rest the full weight of the rack on the leveling jacks.
■
Attach the stabilizers to the rack if it is a single rack installation.
■
Couple the racks together in multiple rack installations.
WARNING:
When installing the server in a Telco rack, adequately secure the rack frame to the
building structure at the top and bottom.
WARNING:
To reduce the risk of personal injury or damage to the equipment, use two or more
people to safely unload the rack from the pallet. An empty 42U rack weighs 115 kg (253 lb), is
over 2.1 m (7 ft) tall, and may become unstable when moved on its casters. Handle the rack
from both sides as it rolls down the ramp from the pallet. Do not stand in front of the rack.
