4-16
Compaq ProLiant DL380 Generation 2 Server Maintenance and Service Guide
System LEDs and Internal Health LED Status Combinations
When the internal health LED on the front panel illuminates either amber or red, the server is
experiencing a health event. Combinations of illuminated system LEDs and the internal health
LED indicate system status (Table 4-9).
IMPORTANT:
For the internal health LED to provide pre-failure and system conditions, the system
management driver must be installed.
The front panel health LEDs indicate only the current hardware status. In some situations,
Compaq Insight Manager XE may report server status differently than the health LEDs because
the software tracks more system attributes.
Table 4-9
System LEDs and Internal Health LED Status Combinations
System LED and Color
Internal Health
LED Color
Status
Red
■
Processor in socket
X
has failed.
■
Processor
X
has failed over to offline spare.
■
Processor
X
is not installed in the socket.
■
Processor
X
is unsupported.
■
ROM detects a failed processor during POST.
Processor failure, socket
X
(Amber)
Amber
Processor in the socket is in a pre-failure condition.
Processor failure, both
sockets (Amber)
Red
Processors are mismatched (speed and/or type).
PPM failure, slot
X
(Amber)
Red
■
PPM in slot
X
has failed.
■
PPM is not installed in slot
X
.
■
PPM is not installed in slot
X
, but the
corresponding processor is installed.
Red
■
DIMM in slot
X
has failed.
■
DIMM in slot
X
is an unsupported type, and no
valid memory exists in another bank.
■
DIMM in slot
X
has experienced a multi-bit error.
DIMM failure, slot
X
(Amber)
Amber
■
DIMM in slot
X
has reached single-bit correctable
error threshold.
■
DIMM in slot
X
is in a pre-failure condition.
■
DIMM in slot
X
is an unsupported type, but valid
memory exists in another bank.
continued
