5-8
Compaq ProLiant 6400R Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer:
Gilbert Saldivar
Project:
Compaq ProLiant 6400R Setup and Installation Guide
Comments:
Part Number:
388776-002
File Name:
f-ch05 PCI Hot Plug Technology
Last Saved On:
3/17/00 12:46 PM
Novell intraNetWare Operating System
Messages
Adapter Not Same
– Adapter is not the same as the adapter being replaced.
Hot-plug replacement cannot continue.
Card Functioning
– Adapter in slot is currently functioning. Add/Replace is
ignored.
Driver in Use
– Adapter is currently in use. Do you wish to force removal?
Driver Loaded
– Driver for adapter is currently loaded. Unload driver and
select again.
General Failure
– Could not perform action because of system failure.
No Hot-Plug Driver
– Hot-plug driver is not responding. Check to make sure the
hot-plug driver is loaded.
Remove Not Supt
– Remove action is not supported for the adapter/slot.
Switch Open
– Slot cannot be initialized because the switch is open. Close the
switch and try Add/Replace again.
Unknown Slot
– Add/Remove performed on an unknown slot. Try the
command again.
Replace Load Driver
– Adapter successfully replaced. Please load driver at this
time.
See the online
PCI Hot Plug Administration Guide
on the Documentation CD
for more information on troubleshooting and error messages.
