INS_RLXE4GE24MODMS_REV– 20 Dec 2017 PAGE 145
INSTALLATION AND OPERATION MANUAL
RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
Server Configuration Help
This page allows you to configure the servers.
Global Configuration
These settings are common for all of the servers.
Label
Description
Timeout
Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply from a
server before it is considered to be dead.
Deadtime
Deadtime, which can be set to a number between 0 to 1440 minutes, is the period
during which the switch will not send new requests to a server that has failed to
respond to a previous request. This will stop the switch from continually trying to
contact a server that it has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but only if
more than one server has been configured.
Key
The secret key - up to 63 characters long - shared between the server and
the switch.
Server Configuration
The table has one row for each server and a number of columns, which are:
Label
Description
Delete
To delete a server entry, check this box. The entry will be deleted during the
next Save.
Hostname
The IP address of the server.
Port
The TCP port to use on the server for authentication.
Timeout
This optional setting overrides the global timeout value. Leaving it blank will use the
global timeout value.
Key
This optional setting overrides the global key. Leaving it blank will use the global key.
