INS_RLXE4GE24MODMS_REV– 20 Dec 2017 PAGE 12
INSTALLATION AND OPERATION MANUAL
RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
Hardware Overview
Front Panel
RLXE4GE24MODMS supports four different module types.
Module
Description
RLXE4GE24MODMS/HV
RLXE4GE24MODMS Chassis With Dual High Voltage Power Supplies
RLXE4GE24MODMS/LV
RLXE4GE24MODMS Chassis With Dual Low Voltage Power Supplies
RLXE4GE24MODMS/8TX
8 x 10/100/1000Base-T(X)
RLXE4GE24MODMS/8SFP
8 x 100 / 1000 Base-X
RLXE4GE24MODMS/XE2SFP
2 x 10G SFP+
RLXE4GE24MODMS/XE4SFP
4 x 10G SFP+
1. Front Panel LED Status:
LED for PW1: When the PWR1 links, the green led will be light on.
LED for PW2: When the PWR2 links, the green led will be light on.
LED for PWR: This LED lights on when the power module is activated.
LED for R.M. (Ring master): When the LED lights on, this switch is designated as the ring master of the
C-Ring topology.
LED for Ring: When the LED light on, the C-Ring is activated.
LED for Fault: Indicates unexpected event occurred.
LED for DEF: System resets to default configuration.
LED for RMT: System resets to default configuration.
2. Status by port LED , support three types LED Status .
LINK Status : Port show link status
SPD Status : Port LED show Speed status
FDX Status : Port LED show Duplex status
3. Console port (RJ-45)
4. Buttons
Reset Button : Push the button 3 seconds for reset; 5 seconds for factory default.
Mode Button : Push the button to change the Port LED Mode .
5. RJ-45 / SFP Module Slot.
6. 10G SFP+ Module Slot.
