INS_RLXE4GE24MODMS_REV– 20 Dec 2017 PAGE 42
INSTALLATION AND OPERATION MANUAL
RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
LACP
Port Configuration
This page allows the user to inspect the current LACP port configurations, and possibly change
them as well.
Label
Description
Port
Indicates the group ID for the settings contained in the same row. Group ID “Normal”
indicates there is no aggregation. Only one group ID is valid per port.
LACP Enabled
Each switch port is listed for each group ID. Select a radio button to include a port in
an aggregation, or clear the radio button to remove the port from the aggregation. By
default, no ports belong to any aggregation group. Only full duplex ports can join an
aggregation and ports must be in the same speed in each group.
Key
The Key value incurred by the port, range 1-65535. The Auto setting will set the key
as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the
Specific setting, a user-defined value can be entered. Ports with the same Key value
can participate in the same aggregation group, while ports with different keys cannot.
Role
The Role shows the LACP activity status. The Active will transmit LACP packets each
second, while Passive will wait for a LACP packet from a partner (speak if spoken to).
Timeout
The Timeout controls the period between BPDU transmissions.
Fast will transmit LACP packets each second, while Slow will wait for 30 seconds before
sending a LACP packet.
Prio
The Prio controls the priority of the port. If the LACP partner wants to form a larger group
than is supported by this device then this parameter will control which ports will be active
and which ports will be in a backup role. Lower number means greater priority.
Save
Click to save changes.
Reset
Click to undo any changes made locally and revert to previously saved values.
