INS_RLXE4GE24MODMS_REV– 20 Dec 2017 PAGE 51
INSTALLATION AND OPERATION MANUAL
RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
MEP
The Maintenance Entity Point instances are configured here.
Object
Description
Delete
This box is used to mark a MEP for deletion in next Save operation.
Instance
The ID of the MEP. Click on the ID of a MEP to enter the configuration page. The range
is from 1 through 100.
Domain
Port: This is a MEP in the Port Domain.
EVC: This is a MEP in the EVC Domain. 'Flow Instance' is an EVC. The EVC must be
created
VLAN: This is a MEP in the VLAN Domain. 'Flow Instance' is a VLAN. In case of Up-MEP
the VLAN must be created
MPLS Link: This is a MEP in the MPLS Link Domain.
MPLS Tunnel: This is a MEP in the MPLS Tunnel Domain.
MPLS PW: This is a MEP in the MPLS Pseudo Wires Domain.
MPLS LSP: This is a MEP in the MPLS LSP Domain.
Mode
MEP: This is a Maintenance Entity End Point.
MIP: This is a Maintenance Entity Intermediate Point.
Direction
Down: This is a Down MEP - monitoring ingress OAM and traffic on 'Residence Port'.
Up: This is a Up MEP - monitoring egress OAM and traffic on 'Residence Port'.
Residence Port
The port where MEP is monitoring - see 'Direction'. For a EVC MEP the port must be a
port in the EVC. For a VLAN MEP the port must be a VLAN member.
Level
The MEG level of this MEP.
Flow Instance
The MEP is related to this flow - See 'Domain'. This is not relevant and not shown in case
of Port MEP.
Tagged VID
Port MEP: An outer C/S-tag (depending on VLAN Port Type) is added with this VID.
Entering '0' means no TAG added.
EVC MEP: This is not used.
VLAN MEP: This is not used.
EVC MIP: On Serval, this is the Subscriber VID that identify the subscriber flow in this
EVC where the MIP is active.
This MAC
The MAC of this MEP - can be used by other MEP when unicast is selected (Info only).
Alarm
There is an active alarm on the MEP.
Add New MEP
Click to add a new MEP entry.
Refresh
Click to refresh the page immediately.
Apply
Click to apply changes.
Reset
Click to undo any changes made locally and revert to previously saved values.
