INS_RLXE4GE24MODMS_REV– 20 Dec 2017 PAGE 29
INSTALLATION AND OPERATION MANUAL
RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
LLDP Neighbor Information
This page provides a status overview for all LLDP neighbors. The displayed table contains a row
for each port on which an LLDP neighbor is detected. The columns hold the following information:
Label
Description
Local Port
The port on which the LLDP frame was received.
Chassis ID
The Chassis ID is the identification of the neighbor’s LLDP frames.
Remote Port ID
The Remote Port ID is the identification of the neighbor port.
System Name
System Name is the name advertised by the neighbor unit.
Port Description Port Description is the port description advertised by the neighbor unit.
System
Capabilities
System Capabilities describes the neighbor unit’s capabilities. The possible capabilities
are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is
disabled, the capability is followed by (-).
Management
Address
Management Address is the neighbor unit’s address that is used for higher layer
entities to assist the discovery by the network management. This could for instance
hold the neighbor’s IP address.
Refresh
Click to refresh the page immediately.
Auto-Refresh
Check this box to enable an automatic refresh of the page at regular intervals.
