INS_CNXE2GE2TX8MSPOE 11 Jan 2021 PAGE 196
INSTALLATION AND OPERATION MANUAL
CNXE2GE2TX8MSPOE
TECH SUPPORT: 1.888.678.9427
Security Features
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
RADIUS/ centralized password management
SNMPv3 encrypted authentication and access security
HTTPS / SSH / SSL enhance network security
DOS/DDOS auto prevention
IP Source Guard
Software Features
Redundant Ring (C-Ring) with recovery time less than 30ms
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
NTP server/client
UPnP
QoS
TOS/Diffserv supported
CoS
Application based QoS
IP based bandwidth management
Network Redundancy
C-Ring
O-Chain
MRP*NOTE
STP/RSTP/MSTP (IEEE 802.1 d/w/s)
PoE management
PoE configuration
PoE Status
PoE Scheduling(turn on/off the PoE device)
Auto-Ping check(Reboot PDs if there is no responses)
RS-232 Serial Console Port
RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
LED indicators
Power Indicator (PWR)
Green : Power LED x 3
Ring Master Indicator (R.M.)
Green : Indicates that the system is operating in C-Ring Master mode
C-Ring Indicator (Ring)
Green : Indicates that the system operating in C-Ring mode Green
Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault)
Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 Port
Indicator (Upper)
Dual color LED: Green for 1000Mbps Link/Act indicator. Amber for
10/100Mbps Link/Act indicator, OFF for
10Mbps Link/Act
PoE Indicator RJ45 Port (Lower) Amber : PoE enable
