INS_CNXE2GE2TX8MSPOE 11 Jan 2021 PAGE 23
INSTALLATION AND OPERATION MANUAL
CNXE2GE2TX8MSPOE
TECH SUPPORT: 1.888.678.9427
Add New
Protection Group
Click to add a new Protection group entry.
Refresh
Click to refresh the page immediately.
Apply
Click to apply changes.
Reset
Click to undo any changes made locally and revert to previously saved values.
Ethernet Ring Protection Switch Configuration
Object
Description
Instance Data
ERPS ID
The ID of the Protection group.
Port 0
This will create a Port 0 of the switch in the ring.
Port 1
This will create “Port 1” of the switch in the Ring. As interconnected sub-ring will have
only one ring port, “Port 1” is configured as “0” for interconnected sub-ring. “0” in
this field indicates that no “Port 1” is associated with this instance
Port 0 SF MEP
The Port 0 Signal Fail reporting MEP.
Port 1 SF MEP
The Port 1 Signal Fail reporting MEP. As only one SF MEP is associated with
interconnected sub-ring without virtual channel, it is configured as “0” for such ring
instances. “0” in this field indicates that no Port 1 SF MEP is associated with this
instance.
Port 0 APS MEP
The Port 0 APS PDU handling MEP.
Port 1 APS MEP
The Port 1 APS PDU handling MEP. As only one APS MEP is associated with
interconnected sub-ring without virtual channel, it is configured as “0” for such ring
instances. “0” in this field indicates that no Port 1 APS MEP is associated with this
instance.
Ring Type
Type of Protecting ring. It can be either major ring or sub-ring.
