INS_CNXE2GE2TX8MSPOE 11 Jan 2021 PAGE 64
INSTALLATION AND OPERATION MANUAL
CNXE2GE2TX8MSPOE
TECH SUPPORT: 1.888.678.9427
Label
Description
VLAN Range
Indicate the VLAN range in which DHCP server is enabled or disabled. The first
VLAN ID must be smaller than or equal to the second VLAN ID. BUT, if the VLAN
range contains only 1 VLAN ID, then you can just input it into either one of the
first and second VLAN ID or both.
On the other hand, if you want to disable existed VLAN range, then you can
follow the steps.
Press Add VLAN Range to add a new VLAN range.
input the VLAN range that you want to disable.
choose Mode to be Disabled.
press Save to apply the change.
Then, you will see the disabled VLAN range is removed from the DHCP Server
mode configuration page.
Mode
Indicate the operation mode per VLAN. Possible modes are:
Enabled: Enable DHCP server per VLAN.
Disabled: Disable DHCP server pre VLAN.
Excluded IP
Configure excluded IP addresses. DHCP server will not allocate these excluded IP addresses to
DHCP client
Label
Description
IP Range
Define the IP range to be excluded IP addresses. The first excluded IP must be
smaller than or equal to the second excluded IP. BUT, if the IP range contains only 1
excluded IP, then you can just input it to either one of the first and second excluded IP
or both.
