ComNav Vector G2, Installation & Operation Manual

Page: 5 / 92

ComNav G2 & G2B Installation & Operation
Document PN 29010093 V1.5 - 3 -
16 December 2016
About this Manual
This manual provides essential information for the safe and reliable operation of the
ComNav’s G2 Satellite Compass. Read this manual in its entirety before using the G2
Satellite Compass for the first time. Keep the manual handy until you become thoroughly
familiar with the operation of the compass.
Note: most of the information in this manual applies to both models of
the G2 Satellite Compasses: the G2 and the G2B.
For easier reading, most references in the text use “G2” – but that
should always be understood as referring to both models. Whenever
a particular item applies only to the G2 or the G2B, it will be so stated
in the text of that item.
When using this manual with the G2, please ignore the sections
which discuss Radiobeacon signals, Beacon receiver operation and
related installation details. Those sections apply only to the G2B.
Manual Format
This manual has been formatted to be printed on both sides of the pages of the manual, and
on standard Letter-sized paper (8.5” x 11”).
If you have obtained this manual as a soft-copy, please note that it is in Adobe® Portable
Document Format (“pdf”), and so may be viewed & printed with Adobe Reader®, or
compatible pdf-format viewers.
When printing this manual with Reader, you should select “duplex printing” (or the equivalent
term used by your printer’s software driver), in order to print it double-sided on the paper. If
your printer does not have built-in duplexing capability, you can still print this manual
double-sided by following the instructions that came with your printer for doing “hand
duplexing”.
You should also select the Auto-Rotate and Centre option in the Print Dialog box, de-select
the Choose Paper Source by PDF page size option; as well, you should set Page Scaling to
None – Reader’s default setting is Shrink to Printable Area, and is printer-dependant (usually
set at ~97%), but that is not needed here.