CommScope Arris G34 Page 61 User Manual Download

Page: 61 / 76

Chapter 7: Protecting & monitoring your Wi-Fi network

Exchange the routing information

The RIP protocol is used to exchange the routing information between the gateway and the

headend.
To enable routing information:
1. From any G34/G36 Web Manager screen, click the

Advanced

menu link.

2. Click

Routing

to display the Routing screen.

Figure 56: Routing Information screen

3. Click

Enable

button to set up the routing information.

4. Specify the details for the RIP (Routing Information Protocol) and Routed Subnet

Configuration.

5. Click

SAVE

to save the changes.

Set up Dynamic DNS client

You can configure your Gateway's router functionality as a Dynamic DNS client.
To create as DNS client:
1. From any G34/G36 Web Manager screen, click the

Advanced

menu link.

2. Click

Dynamic DNS

to display the Dynamic DNS client screen.

SURFboard

G34/G36 DOCSIS

3.1 Wi-Fi

Cable Modem User Guide STANDARD Revision x.3

Summary of Contents for Arris G34













































































Search results

Summary of Contents for Arris G34

Reviews:

Related manuals for Arris G34

Brands by name

Popular brands

CommScope Arris G34, User Manual

Search results

Summary of Contents for Arris G34

Reviews:

Related manuals for Arris G34

Brands by name

Popular brands