Commend SIP Series
Configuration via Web Interface
2.0/0612
61
For the following events and/or at change of the following states, traps are sent from the SIP station to
the management station:
Registration status
(registered, not registered)
Registration data
(who is registered at which domain – primary and secondary server)
Conversation status
(outgoing/incoming call, idle state, conversation)
Status Call destination
(which button is used for which call destination)
Status Ringing
(incoming call no.)
Refuse
call
Station
busy
Status active Conversation
(who is talking to whom – from...to)
Status Conversation end
(who cancelled the conversation and how has it been cancelled)
Status Relay 1
(on, off, blinking)
Status Relay 2
(on, off, blinking)
Name
OID
Parameter („Trap“)
commend-
StationOb-
jectStatus
Notification
.1.3.6.1.4.1.37568.2.10
standby
hung up
dialling
call in
progress
ringing
buttonpressed
remote hung up
<button no.> <user@proxy>,
e.g. button 1, [email protected]
<module no. button no,> <user@proxy>
e.g. module 2 button 7, [email protected]
<short dial no.>, user@proxy
e.g. short dial 5, [email protected]
<arbitrary dialing>
e.g. [email protected]
<http request user>, <user@proxy>
e.g. http request 556, [email protected]
TO: <user> e.g. TO: 556
sip:<user>@<domain>
e.g. sip:[email protected]
.1.3.6.1.4.1.37568.2.1.1
register
secondary registration disabled
registered primary, <user>@<domain>
e.g. registered primary, [email protected]
registered secondary, <user>@<domain>
e.g. registered secondary, [email protected]