Commend SIP Series
Configuration via Web Interface
2.0/0612
43
Speed Dial Number:
When using a SIP station with full keypad, a direct dialling number can be
entered here for dialling the respective call destination.
Direct Dialling Button:
Selection of the direct dialling button for the call destination.
With click on the button
Add
, the entered call destination (i.e. the entry) is added to the
”Phonebook”
Configuration Call Chain
With click on the button
Dialing sequence
the input mask for configuration of a call chain is opened.
I.e. the call is taken over within a configurable time period, the call is forwarded to the appropriate call
destinations.
Name:
Here a name for the call chain can be entered.
Destination
x
:
In the fields up to 10 call destinations can be entered, which are dialled auto-
matically, if the call is not taken over within a definable time (see field
next
).
The call destinations are entered as described on
page 42
.
next:
Here the time in seconds is entered, after which the next call destination of the sequence is
dialled (if the call is not accepted).
Reiterate:
If the checkbox is activated, the call chain will be started once again from
Destination
1
, after the last call destination has been reached. This process will be repeated until the call is taken
over (
infinite loop).
Speed Dial Number:
When using a SIP station with full keypad, then here a direct dialling number
for dialling the respective call destination (and therewith the call chain) can be entered.
Direct Call Button:
Here the button for direct dialling the respective call destination (and thus the
call chain) can be selected.
With click on the button
Add
, the entered call chain is added to the
”Phonebook”
.
Note:
For 1-,2-,3-button versions this field has no function.
Besides the buttons 0–9 it is also possible to use the button T for direct diallings (e.g. T1, T3...)
Note:
The number and the labelling of the buttons in the drop-down menu depends on the used station
version (
see page 10
) and the number of configured direct dialling modules in use (
see page 49
).
When using a handset, it is possible to select “Handset offhook”. Via this feature it is enabled, to dial
the number of the respective call destination by simply going off-hook.
Note:
For 1-,2-,3-button versions the field has no function.
Note:
The number and the labelling of the buttons in the drop-down menu depends on the used station ver-
sion (
see page 10
) and the number of configured direct dialling modules in use (
see page 49
).
