Commend SIP Series
Configuration via Web Interface
2.0/0612
45
Audio Settings
Select tab
Audio
– following dialogue is indicated:
Mic Sensitivity:
Configuration of the desired sensitivity of the (connected) microphone of the SIP
station in 7 levels (–12 dB to +6 dB).
Speaker Volume:
Configuration of the desired volume level of the (connected) loudspeaker of the
SIP station in 13 levels (–24 dB to +12 dB)
Noise Suppression:
Configuration of the background noise suppression in 5 levels:
Minimum level “
1 (low)
” to maximum level “
4 (maximum)
”.
If no background noise suppression shall be used, then “
0 (off)
” has to be selected.
Echo Suppression:
Configuration of the acoustic echo canceller (AEC) in 5 levels:
Minimum “Echo Cancelling” level “
0 (minimum)
” to maximum level “
4 (maximum)
”
Any modifications made in the “
Audio Settings
” fields are taken over in the running configuration as
soon as the button
(at the bottom right of the section “Audio Settings”) is clicked.
Modified values in the fields
Mic Sensitivity
and
Speaker Volume
become active immediately du-
ring a running conversation.
Modified values in the fields
Noise Suppression
and
Echo Suppression
become active not before
the next conversation.
Default: 0 dB
Default: 0 dB
Note:
The configured level defines the volume of the ring tone (at an incoming call) as well as the volume of
the different signal tones.
Default: 1 (low)
Default: 2 (medium)
