Commend G3-IAX Series, Product Manual

Page: 15 / 42

G8-IAX / G3-IAX Pre-notes for start-up
3.0/0616 15
Display indication dot-matrix display
A configured “display text EE 811” of an IAX channel, via which the respective call is set up, is indicated
on the display of dot-matrix display Intercom stations – besides the dialled call number and/or the call
number of the caller.
The “display text EE 811” of an IAX channel, via which a call is set up, is indicated on the display of the
Intercom station as follows:

Incoming call: below the call number of the calling VoIP phone

Outgoing call: below the call number of the IAX channel, via which the call to a VoIP phone is set up
(the channel, which has been dialled)
Indication of IAX channel on the Intercom station’s display
Pre-configuration VoIP server
In order to connect VoIP subscribers to the Intercom system via a Gx-IAX card, preceded configuration
of the respective VoIP server is required.
Pre-configuration of the VoIP Server is required e.g. for the following functions:
 “Trunk connection” between Intercom Server and VoIP server

“Audio streaming”

“Appendix”
ATTENTION: Indication of the display text
A configured “display text EE811” of a channel of a Gx-IAX card is not indicated on the display of a
VoIP phone.
NOTE: Further information
For further information about the “display text EE 811”, see manual “ PRO 800 Basic ”.
GOOD TO KNOW: VoIP
On the following pages, notes for pre-configuration required for the VoIP server are highlighted with a
GOOD TO KNOW box.
X-Cancel
4712
IAX 109
Volume
œ .
Call number VoIP phone
“display text EE 811“ of IAX channel
X-Cancel
109
IAX 109
Volume
œ .
Conversation is set up by an
incoming call from
VoIP phone “4712”:
Conversation to a VoIP phone
is set up by an outgoing call
via IAX channel “109”:
via which the call is set up
Call number IAX channel