G8-S0/G3-S0-I
Telephone Interface
1.1/1010
25
DTMF Times
In the field
DTMF decoding time [ms]
, the DTMF decoding time can be modified in milliseconds
(default: 60 ms)
In the field
DTMF tone period [ms]
, the tone duration of the DTMF tone can be modified in milli-
seconds (default: 80 ms)
In the field
DTMF gap period [ms]
, the pause between the DTMF tones can be modified in milli-
seconds (default: 70 ms).
Telephone Numbers, Dialling Sequences
In the column
Telephone numbers
up to 8 different telephone numbers can be entered (max.
24-digit).
Following characters are available: 0 – 9, * and #
At
Area code (dial prefix)
a number (max. 8 digits) to be automatically pre-dialled can be defined,
e.g. an exchange number for dialling out, or for selecting a certain provider.
Following characters are available: 0 to 9, *, # or P for 1 second pause
In the column
Sequences
up to 8 different dialling sequences can be entered, with which the order
of the up to 8 entered telephones numbers are defined.
Max. 15 digits per dialling sequence, e.g. 112211.
Activation Dialling Sequence
The different dialling sequences are activated by inputs, to which e.g. a time switch can be connected.
For the inputs, dialling simulation has to be configured with the following code:
XX9T99
and the
number of the dialling sequence
,
e.g. XX9T992
for activation of dialling sequence 2
Select
Inputs
–
Dial via Input
–
Input initiates dialling:
Right click on the desired input and select the function
Add input initiates dialling
.
Note:
By means of entry of number “
9
” at the end of the dialling sequence, the respective call is switched to
the 1st telephone number of the sequence again, if the initiated call is not answered by the last tele-
phone number of the sequence (e.g. “123412349”).
Attention:
In case of a
call via dialling the interface
call number, the dialling sequence is stopped after the
“Switch off time simplex“ (3 minutes in standard – G3-TEL / G8-TEL switches to simplex when play-
ing the calm down message).
To avoid the disconnection, the field “Auto. Disconnection” (at “Subscriber” – “Entitlements“ – tab
“Alarm, Common”) must be deactivated for the telephone interface.
Note:
The prefix “XX“ cancels an existing conversation (built up by dialling the interface call number) before
switching the dialling sequence, otherwise the sequence would not be changed.
“XX” has no effect on an existing call request, i.e. the call remains.
