Commax WDP-180D, Use And Care Manual

Page: 10 / 49

- 10 -
Preparing for use
Installing the base station
Range
Depending on the ambient conditions, the outdoor range is approx.
300 m. The indoor range is approx. 50 m depending on the
construction of the building.
Connecting
1. Insert the small plug on power supply unit and the small plug on
telephone cable into the appropriate sockets on the bottom of the
base station.
2. Place cables in each cable duct
3. Insert power supply unit into mains socket.
4. Insert the plug on telephone cable into telephone socket.
Installing the handset
Inserting the batteries
1. Open battery compartment and insert included batteries. Make
sure poles are correct.
2. To close, slide the cover onto the battery compartment until it
closes tight.
Charging the batteries
The included batteries are not charged. To charge, place the handset
in the base station. You will hear a signal tone of the handset to
confirm that the batteries are being charged.
The charging status symbol on the handset indicates the charging
status of the batteries:
Batteries empty
Batteries 1/3 charged
Batteries 2/3 charged
Batteries full