Commax WDP-180D, Use And Care Manual

Page: 46 / 49

- 46 -
Reference
Trouble shooting
Symptom Cause Remedy
No display.
9 Handset not switched on.
9 Battery empty.
9 Handset switches on.
9 Put handset on the base unit
for charging batteries.
No allocation of the
switched line.
9 The telephone connection
cable is not correctly put.
9 The power connection cable is
not correctly put.
9 The switched line is occupied
by another handset.
9 Plug in the telephone line
cable into the base unit and
also check the wall socket
connection.
9 Plug in the power ADAPTOR
into the base unit.
9
Wait until the switched line is
free.
No radio communication to
the base unit or handset is
not ringing the bell.
9 Handset not registered at
Base-station.
9
The power connection cable is
not correctly put into base.
9 Handset Have to be
registered at base unit.
9
Plug in the power ADAPTOR
into the base unit.
Handset is not ringing the
bell.
9 Ringing volume is too low. 9 Set the ringing volume high
on the handset.
When dialing, the switched
line disconnected.
9 Lock mode enable 9 Check lock mode, and set
lock mode disable.