Commax WDP-180D, Use And Care Manual

Page: 43 / 49

- 43 -
Access code
The access code must be pre-dialed to dial into the public telephone
network on PABX’s. The telephone inserts the pause automatically if
the access code has been programmed.
1. Press
MENU
.
2. Select
Base Set
and press
OK
.
3. Select
Dial Set
and press
OK
.
4. Enter the base station PIN (factory setting: 0000).
5. Select
Access Code
and press
OK
.
6. Enter the access code (up to 4 digits).
LEFT
: move left the cursor.
RIGHT
: move right the cursor.
7. Press
OK
to confirm.
Recall time
You can set different recall times to adapt the telephone to your PABX:
98, 270, 380 and 600 ms.
1. Press
MENU
.
2. Select
Base Set
and press
OK
.
3. Select
Dial Set
and press
OK
.
4. Enter the base station PIN (factory setting: 0000).
5. Select
Recall Time
and press
OK
.
6. Select the recall time.
7. Press
OK
to confirm.
Emergency number
You can enter three numbers of up to 10 digits for emergency number.
The emergency numbers are valid for all handset.
You can dial the emergency numbers even if your handset is barred
for external calling.
1. Press
MENU
.
2. Select
Base Set
and press
OK
.
3. Select
Dial Set
and press
OK
.
4. Enter the base station PIN (factory setting: 0000).
5. Select
Emer. Number
and press
OK
.
6. Select the area to enter the number and press
OK
.
7.
Clear
: delete the digit.
LEFT
: move left the cursor.
RIGHT
: move right the cursor.
8. Press
Option
.
9. Select
Save
and press
OK
to confirm.
Access Code
OK Clear
321|
96 ms
√
OK Back
Recall Time
270 ms
380 ms
600 ms
OK Back
Emergency No
Emer. Number 2
Emer. Number 3
Emer. Number 1