Commax WDP-180D, Use And Care Manual

Page: 14 / 49

- 14 -
Displaying the telephone number
If the network provider supports caller line identification, the caller’s
telephone number is displayed on an incoming call. If the caller’s
number is included in your handset phone book, the corresponding
name is displayed instead.
Displaying the call time
During an external call, the handset displays the call time.
Switching to tone dialing
If your phone is set to pulse dialing, you can switch temporarily to ton
dialing during the call if required.
1. Press
MENU
.
2. Select the menu item
DTMF
.
3. Press
OK
to active tone dialing.
Speaker on and handsfree
On the speaker on mode, other persons in the room can listen, in
handsfree mode you put down the handset and have your hands free
to make notes for example.
By repeatedly pressing
TALK
you switch to speaker on mode (once)
and handsfree (twice) and back during the call. Switching from normal
to speaker on and handsfree mode is shown briefly on the display. The
speaker symbol is also visible in both operation modes.
Speaker on and handsfree mode are possible during an external call
and internal call also.
Notes:
You can only switch to speaker on and handsfree operation
when the battery symbol has at least one segment.
Receiver and speaker volume
Receiver and speaker volume (in handsfree or speaker on mode) can
be adjusted. Three volume levels for the receiver and six volume
levels for speaker are possible.
Adjusting the receiver volume
With
UP
/
DOWN
you can adjust the receiver volume during the call.
The selected receiver volume is stored.
Adjusting the speaker volume
With
UP
/
DOWN
you can adjust the speaker volume during the call in
handsfree or speaker on mode. The selected speaker volume is stored.
The volume is stored separately in speaker on and handsfree mode.
Speaker On