Comet Labs NFPS2, User Manual

Page: 93 / 93

Chapter16 The Init Button
The Init button is used for:
1. Print Configuration Report: Press Init button for exceeding 3 seconds and
then the connected HP printer or PCL supported printer will print out the
system configuration.
2. Maintenance: Plugging in the power adapter while pressing the Init button
until USB1 and USB2 LED indicators blink alternately. After that, the Server
will do the following tasks:
A. Reset the Server to factory default, which will restore most of the
parameters and settings to factory default values,
B. Perform a TFTP server. You can upgrade new firmware using the “Image
Burner” utility.
Note: After performing the tasks mentioned above, you have to plug off the
power adaptor and then plug in the power adaptor to restart the Server.
93