Comdial Impact 80120S User Manual Download Page 81

Page: 81 / 140

GCA70258

LCD Speakerphone Station User’s Guide

August, 03

Comdial

• To use Tracker to transfer a call to a park orbit for retrieval

and transmit the call’s park orbit code and caller ID
information (if available),

1. ANSWER call AND SELECT TRANS.
2. DIAL extension number.
3. If the called station does not answer or is busy, SELECT TRACK.
4. HEAR confirmation beep (Tracker page accepted) OR HEAR busy

tone (Tracker page not accepted).

5. PRESS SPEAKER button to end.

• To retrieve a call that you parked using the Tracker option,

1. PRESS HOLD button to scroll your held calls, (display shows PAGE

and extension number of each parked call).

2. PRESS TAP to retrieve the displayed parked call.

• If you receive a parked call message on your Tracker pager,

1. GO to any system station.
2. PRESS INTERCOM.
3. DIAL Tracker pager orbit code (#800 to #899).
4. RETRIEVE call.

• To enable or disable a Tracker pager at your station,

1. PRESS INTERCOM.
2. DIAL #07 to enable, OR DIAL #06 to disable.
3. PRESS SPEAKER to end.

Summary of Contents for Impact 80120S













































































































































Search results

Summary of Contents for Impact 80120S

Reviews:

Comdial Impact 80120S, User Manual, Page: 81 / 140

Search results

Summary of Contents for Impact 80120S

Reviews: