manualshive.com logo in svg

Comdial Impact 80120S, User Manual, Page: 61 / 140

Share
Download
Comdial Impact 80120S User Manual Download Page 61

GCA70258

LCD Speakerphone Station User’s Guide

August, 03

Comdial

55

•  To receive a message at an 

alerted station,

1.  OBSERVE flashing message waiting 

light and the LCD message indicating 
who called for you.

2.  SELECT  CALL to dial the messag-

ing station automatically.

3.  SELECT  CLEAR to clear the mes-

sage from your station.

5.3  Response Message Delivery

By programming one or more RESPONSE MESSAGE

 

buttons on 

your LCD speakerphone, you can respond with a variety of messages 
to many calling situations.  A scrolling RESPONSE MESSAGE 
button allows the sender to select from several different messages 
which have been programmed by the system attendant.  A fixed 
RESPONSE MESSAGE button sends the same message you previ-
ously select each time it is pressed.  (See page  for instructions on pro-
gramming a dedicated RESPONSE MESSAGE button.

•  To send an LCD message when you call and receive busy 

signal or no answer,

1.  While still on the call, PRESS the appropriate RESPONSE MES-

SAGE button to send a preselected message to the other telephone,

2.  If a scrolling Response Messaging was programmed, continue to 

PRESS RESPONSE MESSAGE button AND DIAL # when your dis-
play shows the message you wish to send.

•  To send an LCD message to a caller who has initiated a 

SOHVA or intercom call from another LCD telephone,

1.  HEAR the SOHVA tone or voice announcement in your handset or 

headset.

2.  PRESS the appropriate fixed RESPONSE MESSAGE button to send 

a preselected message to the calling telephone,

Call J Doe

CALL

CLEAR

Receiving a Message

Summary of Contents for Impact 80120S













































































































































Reviews:

No comments