manualshive.com logo in svg

Comdial Impact 80120S, User Manual, Page: 46 / 140

Share
Download
Comdial Impact 80120S User Manual Download Page 46

Advanced Call Handling 

40

Comdial

August, 03

4.3.2  DIVERTING ALL INCOMING CALLS TO 
ANOTHER STATION

Call diverting permits you to send an incoming call to another station 
that you have previously designated. You can divert an incoming call 
to the designated station whether you are busy or idle.

•  To identify the station to receive diverted calls,

1.  PRESS INTERCOM.
2.  DIAL  *55.
3.  DIAL extension number of station to receive diverted call.

•  To divert calls to the designated station,

1.  HEAR ringing AND/OR SEE flashing line status light.
2.  PRESS programmed CALL FORWARD button (system immediately 

forwards ringing call to station you designated).  See page  for pro-
gramming instructions.

4.4  Call Forward Outside System 

(CFOS)

If enabled by your installer, the Call Forward Outside System 
(CFOS)* feature allows you to forward incoming or transferred line 
calls to telephone numbers outside the system.

•  To activate CFOS with your LCD speakerphone,

1.  SELECT  OPTIONS.
2.  SELECT  NEXT until  CFWD 

appears.

3.  SELECT  CFWD.
4.  SELECT  SET.
5.  SELECT  NEXT until  CFOS 

appears.

6.  SELECT  CFOS.

Call Forwarding

NoANS

CFOS

NEXT

Selecting CFOS

Summary of Contents for Impact 80120S













































































































































Reviews:

No comments