Comdial Impact 80120S User Manual Download Page 36

Page: 36 / 140

Making Calls

Comdial

August, 03

• To store a number while you are on a call (if available),

1. PRESS programmed SAVE NUMBER REDIAL button twice (the

display prompts you to dial a number).

2. DIAL the number that you wish to save (the system immediately

saves the number for later redial; it does not dial it over the line you
are on now).

• To redial the saved number,

1. PRESS line button to select a line.
2. PRESS programmed SAVE NUMBER REDIAL button (system auto-

matically dials the number that you saved earlier).

3.5 Camping On - Busy Station,

Automatic Callback

If you call another station and receive a busy signal or a Do Not
Disturb tone, you can press a button that will cause the system to ring
your telephone when the station is available.

• To camp on at any busy station,

1. SELECT CAMP.
2. Your telephone immediately hangs

up. When the station you called
becomes available, your telephone
will ring with five short tone bursts.

• When you hear five short tone

bursts,

—PRESS INTERCOM OR SELECT

ANS. The other telephone will start ringing.

Note: If you do not press INTERCOM after the ring back tones
within the time limit set by the installer, the call back is canceled.

J Doe Ext 321 Is Busy

SOHVA

CAMP

Camping On Selection

Summary of Contents for Impact 80120S













































































































































Search results

Summary of Contents for Impact 80120S

Reviews:

Related manuals for Impact 80120S

Brands by name

Popular brands

Comdial Impact 80120S, User Manual

Search results

Summary of Contents for Impact 80120S

Reviews:

Related manuals for Impact 80120S

Brands by name

Popular brands