manualshive.com logo in svg

Comdial Impact 80120S, User Manual, Page: 73 / 140

Share
Download
Comdial Impact 80120S User Manual Download Page 73

GCA70258

LCD Speakerphone Station User’s Guide

August, 03

Comdial

67

6.6   Response Message Button

You may program a RESPONSE MESSAGE button, which allows 
you to send an LCD message to a caller who has initiated a SOHVA 
or intercom call from another LCD speakerphone, or to send an LCD 
message to another LCD speakerphone that you call and receive a 
busy signal or no answer.

•  To store a scrolling RESPONSE MESSAGE button, proceed 

as follows (user may press button repeatedly to choose from 
up to 30 system supplied messages),

1.  PRESS INTERCOM
2.  DIAL **6.
3.  PRESS programmable button for RESPONSE MESSAGE button 

location.

4.  DIAL 00
5.  DIAL # to save programming.
6.  PRESS SPEAKER to end.
7.  LABEL the button location.

•  To store a fixed RESPONSE MESSAGE button (delivers the 

same message each time it is pressed),

1.  PRESS INTERCOM.
2.  DIAL **6
3.  PRESS programmable button for RESPONSE MESSAGE button 

location.

4.  DIAL message number (01-30) from list of messages.

5.  DIAL # to save programming.
6.  PRESS SPEAKER to end.
7.  LABEL the button location.

Note:  Programmed messages available for use are created by the 
system attendant and listed in a table on page.

Summary of Contents for Impact 80120S













































































































































Reviews:

No comments