Comdial Impact 80120S User Manual Download Page 57

Page: 57 / 140

GCA70258

LCD Speakerphone Station User’s Guide

August, 03

Comdial

5. NONVERBAL MESSAGING

5.1 LCD Message Delivery

You can set system-supplied messages at your station to be received
and displayed by a calling LCD speakerphone.

• To turn on a message from your telephone,

1. PRESS INTERCOM AND DIAL *02.
2. DIAL the desired code number from your message list (01–30) on the

next page, OR PRESS HOLD button to scroll through the available
messages AND DIAL # to select.

• For a “Back At” message, dial the code for time numbers and colon

from dialing codes table.

(For example, DIAL # 00 01 29 04 05 for the time 01:45).

• For a “Call” message, dial code for telephone number of your new

location.

(For example,

DIAL

09 07 08 15 02 02 00 00

for the number

978–2200).

3. DIAL # AND PRESS SPEAKER to end message.

• To turn off the message and your intercom light,

—PRESS INTERCOM AND DIAL #02.

Note: See following page for LCD dialing codes.

Summary of Contents for Impact 80120S













































































































































Search results

Summary of Contents for Impact 80120S

Reviews:

Related manuals for Impact 80120S

Brands by name

Popular brands

Comdial Impact 80120S, User Manual

Search results

Summary of Contents for Impact 80120S

Reviews:

Related manuals for Impact 80120S

Brands by name

Popular brands