Using in Group 2 and Group 3 mode
②
③
①
7
①
While pulling the left and right connector adjustment levers,
②
Push the main body firmly using your knee, etc. or push the main
body one side at a time until the back of the main body contacts
the vehicle seat backrest, then release the main body.
③
Check that the color indicators A and B are “green”.
8
If the vehicle seat backrest can be reclined,
adjust the reclining angle to make the gap with
the back of the main body as small as possible.
● When pushing the main body, check the connector positions and adjust so
that there is not a large difference in the left and right push-in amounts.
● In some vehicles there may be a gap between the back of the main body
and the vehicle seat backrest even when the main body is pushed firmly.
40
Continue
Connector
adjustment lever
Color indicator A (green)
Color indicator B (green: locked)