Combi SAVETREK User Manual Download Page 50

Page: 50 / 56

Returning to Group 1 mode

Adjustment lever on back of

main body (Group 1)

③

②

①

②

Buckle

Inner cushion

Using in Group 2 and Group 3 mode

①

Pass the left and right baby belts through the shoulder belt covers.

②

While pulling up the adjustment lever on the back of the main

body (Group 1),

③

Pass the left and right baby belts through the shoulder belt slots,

making sure they are not twisted.

①

Open the user manual storage pocket and take out the belt

adjustment metal.

②

Attach the left and right baby belts to the belt adjustment metal,

making sure they are not twisted.

Shoulder belt cover

①

Pass the baby belts

so they are not

twisted.

Pass the buckle through the inner

cushion and attach the inner cushion.

Make sure that the

baby belt is attached

properly.

WARNING

Baby belt

User manual

storage pocket

Belt adjustment

metal

Summary of Contents for SAVETREK

























































Search results

Summary of Contents for SAVETREK

Reviews:

Related manuals for SAVETREK

Brands by name

Popular brands

Combi SAVETREK, User Manual

Search results

Summary of Contents for SAVETREK

Reviews:

Related manuals for SAVETREK

Brands by name

Popular brands