4
5
6
③
①
Adjustment shaft
②
48
Continue
Using in Group 2 and Group 3 mode
①
Pass the crotch belt through the seat urethane and attach the seat
urethane to the seat surface.
②
Pass the crotch belt and the baby belt through the seat cover and
attach the seat cover to the seat surface.
(Refer to “Converting to Group 2 and Group 3 mode”.)
①
Pull down the adjustment lever on the headrest (Group 2
·
Group 3)
to the lowermost position.
(Refer to “Using in Group 2 and Group 3 mode : Adjusting the
headrest position”.)
②
Adjust the reclining angle to the most upright position.
(Refer to “Using in Group 1 mode : Using the reclining function”.)
①
While pulling up the adjustment lever on the back of the main body
(Group 1) to the highest position,
②
Pass the left and right shoulder belt cover attachment loops from the
front of the main body through the shoulder belt slots,
③
Attach the left and right shoulder belt cover attachment loops to the
adjustment shaft.
Adjustment lever on back
of main body (Group 1)
Shoulder belt cover
attachment loop
Shoulder belt slot
Shoulder belt cover
attachment loop
