Columbus Instruments Exer 3/6, Hardware Manual

Page: 35 / 60

35
Treadmill Hardware Manual 1011-0002 v1.02

1 x CI-Bus Hub or CI-Bus Switch Mini

1 x USB-A to USB-B cable, 1.8m (6ft)

1 x RJ-45 communication cable, 1.8m (6ft)

Treadmill Controller with power cord

1 x Motor Cable, 2m (6ft)

1 x Shocker Cable, 1.8m (6ft), 15 pin

1 x Instruction Manual

1 x Treadmill Software Flash Drive (if using with Oxymax)

2 x Allen wrench

4 x 3in standoffs (may have more for additional lanes)

6 x ¼in-20 x 5/8in socket nuts (may have more for additional lanes)

2 x Lane Base plates (may have more for additional lanes)

1 x Support Bar (may have more for additional lanes)

Modular Treadmill Lane

Coupler with guard

Motor Base Assembly

Bottle Brush

Fan Power Cable, 3.5mm male to male
7.2 Assembly
It is recommended to use an AC power strip to provide a common access to AC power for all components of
the Treadmill system and host computer.