48
Treadmill Hardware Manual 1011-0002 v1.02
The menu options are as follows:
•
Restore Defaults
•
Serial Number
•
Run-Time Meter
•
Odometer
•
Fan Voltage
•
Unit ID
•
Baud Rate
➢
AutoCal Speed
•
Accel
•
Mode
•
Calibrate Shock
•
Exit
The INTENSITY knob is used to navigate the options on the User Menu. Clockwise rotations will move the
selection arrow up, and counterclockwise rotations will move the arrow down.
Press the ODOMETER RESET button to select an option to edit and save any changes.
Use the SPEED knob to adjust the settings and values while editing.
8.1 Restore Defaults
The top option on the menu list. This is used to restore all
the factory settings saved during the treadmill’s
factory calibration. This may be necessary during service to restore a known configuration should for any
reason the current settings be unknown or have become corrupt and the treadmill system is non-responsive.
Press the ODOMETER RESET button to select this option. The screen will display:
Restore Defaults Are
You Sure?
Press and hold the ODOMETER RESET button to restore the factory settings. Else, press and release to cancel.
8.2 Serial Number
This option is used to see the electronic serial number which should match the Columbus Instruments serial
tag on the outside of the cabinet. For service, this number may be referenced to lookup any specific details or
notes about your specific Treadmill and Controller. This option is non-editable.
8.3 Run-Time Meter
This option is used to report the total amount of time the Treadmill Controller has been powered-on. The
format is Days : Hours : Minutes (DHM). The run-time meter is saved every ten minutes or when the AC power
is switched off. This option is non-editable.
8.4 Run-Time Odometer
This option is used to report the total accumulated distance (in meters) the treadmill belt has moved. This
distance is formatted for easier viewing. The run-time odometer is saved every ten minutes or when the AC
power is switched off. This option is non-editable.
Summary of Contents for Exer 3/6
Page 2: ......
