27
Treadmill Hardware Manual 1011-0002 v1.02
In the Time Limit Mode (indicated by “T”), the odometer is replaced by a timer which is preloaded to
the duration specified in the User Menu
In the Distance Limit Mode (indicated by “L”), the odometer is preloaded to the distance duration
specified in the User Menu
•
Then press and release the MODE button to set and run the speed using the SPEED knob.
Else, press and hold the MODE button to start accelerating toward the end speed. The odometer will
begin to count up or the duration values will begin to count down.
•
Observe the animals. If any begin to rest on the grids, you may increase the repetition rate to “2Hz”, or
“3Hz” or increase the stim
ulus INTENSITY setting.
4.4 Controls
4.4.1 Contrast/Odometer Reset
Turning the CONTRAST knob adjusts the LCD display contrast. Adjust for best viewing at any time.
In the Normal mode of operation, the odometer will display the accumulated distance traveled. When the
ODOMETER RESET button is pressed, the odometer will reset and hold at zero. It will begin to count up when
released.
In a Time Limit or Distance Limit mode of operation, the remaining duration of the session time or distance is
displayed. When the duration reaches zero, the treadmill belt will STOP, terminating the exercise session.
Simply replace the animals with the next group and press the ODOMETER RESET button. The duration counter
will be reloaded and automatically the treadmill belt mode will RUN again.
4.4.2 Speed / Mode
Turning the SPEED knob will adjust the set speed of the treadmill belt when its mode is set to STOP or RUN.
Pressing the MODE button in the following ways will change the treadmill belt mode:
•
From STOP, press and release to go to RUN.
•
From STOP, press and hold to go to ACCELERATION.
•
From RUN, press and release to return to STOP.
•
From RUN, press and hold to go to ACCELERATION.
•
From ACCELERATION, press and release to return to STOP.
•
From ACCELERATION, press and hold to go to RUN.
Stop
By default, when the AC power is switched ON, the treadmill belt mode is set to STOP. In this mode, the
treadmill belt will be disabled from running and come to rest. The current speed selected will be displayed but
the mode indicator is blank. The odometer or distance duration will not accumulate, and the time duration will
freeze to preserve the remaining time in the session.
Summary of Contents for Exer 3/6
Page 2: ......
