Columbus Instruments 0184-006M, User Manual

Page: 39 / 39

37
Notes: The acceleration parameters entered in the text boxes will not be applied and become current
until the Write button is clicked.
The Clear Dt button will clear the
odometer on the Treadmill Controller
(the same as the push button) (F ‐ 58).
The Read Speed button will update the
Belt Status, Spd(m/min) and Dist Tr (m).

Belt Status: “Idle”, “Running” and “Accel” are reported for treadmill belt modes
“STOP”, “RUN” and “ACCEL” respectively.

Spd(m/min): the speed displayed by the Treadmill Controller.

Dist Tr (m): the distance traveled recorded by the odometer.
If the “Continuous” option is checked when the Read Speed button is clicked, then the update
will repeat every 1 second. To stop the continuous update, click to uncheck the “Continuous”
option and click the Read Speed button again.
Figure 58