Columbus Instruments 0184-006M, User Manual

Page: 21 / 39

19
Upon successful identification the Treadmill Controller by
the application, the host COM port and Treadmill
Controller information are displayed at the top of the
window (F ‐ 31).
5.2 No Device Found
If the Treadmill Controller could not be
found, the following message is displayed
(F ‐ 32).
To re ‐ attempt device connection after a
failed communication:

Click the Scan Ports button to automatically search all available serial (COM) ports for the
Treadmill Controller.

For Advanced Users when the device address is already known,
o
Select the “Manually Select Address” radio button.
o
Choose the correct device number from the pull ‐ down menu.
o
Click the Scan Ports button to scan an individual port.

If multiple attempts at device connection still result in “No Device Found!” prompts see the
Troubleshooting section of this manual (Chapter 8).

If the problem cannot be remedied by the suggested troubleshooting tips, contact
Columbus Instruments.
Figure 31
Figure 32