Columbus Instruments 0184-006M, User Manual

Page: 13 / 39

11
3) Attach the running lane assembly to the motor assembly (F ‐ 13).
4) Remove the coupler guard cover. Screw the 3” stand ‐ off into the motor assembly and
tighten. Align the coupler between
the running lane assembly and the
motor assembly. Slide the assemblies
together with the coupler around
both shafts. DO NOT tighten the
coupler set screws yet. Insert the cap
screw through the running lane
assembly and tighten into the stand ‐
off. Center the coupler and tighten
the set screws with the included
Allen wrench.
5) Replace the guard cover on the
coupler (F ‐ 14).
Figure 13
Figure 14