Columbus Instruments 0184-006M, User Manual

Page: 20 / 39

18
5.1 Treadmill Software Initialization
From the desktop taskbar, select “Start » All Programs » Treadmill Software » Treadmill
Software”.

Upon initialization, the software will
automatically scan the Treadmill Controller’s
available serial communication ports (COM) for
existing devices and associated address
identification numbers (F ‐ 29).

The starting device identification address (DEVID
220) is assigned to the Treadmill Controller(s)
with additional addresses following numerically
for multiple devices.

The starting device identification address (DEVID 230) is assigned to the Shock Controller(s)
in this same manner.
To rescan the Treadmill Controller for the presence or addition of connected devices, select
“Tools » Device Scan” from the Treadmill Software main window .

Click the “Scan for New Devices” button to add any devices previously not configured.

Click the “Scan Configured Devices” button to rescan devices already present in the latest
configuration file.

Click on the “Exit” button to complete the process and close the “Communication Scan”
window.
After closing the window, an “ Update Device
Configuration” prompt will appear (F ‐ 30).

Click the “Yes” button to save the new device
configuration.

Click the “No” button to keep the previous
device configuration.
Figure 29
Figure 30